Lancia Radio Code Finder – Decode & Unlock Online (All Models)

Lancia Radio Code Finder (All Models)

Hello Dear Lancia Owners,


Telegram Radio Code Support

WhatsApp Radio Code Support

Did your Lancia vehicle (Ypsilon, Delta, Musa, Phedra, Lybra, etc.) radio get locked with “CODE”, “LOCKED” or “CANCHECK” warning after battery replacement? To bypass this security feature and get back to your music, you need the 4-digit password calculated according to your radio serial number.

In this guide, we will explain how to find the codes for Blaupunkt, Bosch, Continental, Daiichi and Philips brand radios used in Lancia vehicles.

If you know your serial number, you can instantly learn your code using our Online Radio Code Finder Service below.

Important: Where is the Serial Number Located?

In order to calculate your Lancia radio code, you need to remove your radio from its slot and read the label on the case.

  • To remove the radio, insert the appropriate “U” type removal tools into the 4 holes on the front panel (depending on the model) and pull.
  • Note the BP, 815, 905, PH, A2C or DAIICHI radio serial number information on the label.

After learning your serial number, you can use the calculation tool below.

Supported Lancia Radio Models

Our online inquiry tool below supports all major brands used in Lancia vehicles:

Blaupunkt | Bosch | Continental | Daiichi | Philips


1. Lancia Blaupunkt & Bosch Series (BP, 815… and 905…)

These are the most common radios in Lancia Ypsilon, Musa and Delta models. There are two types:

  • Standard Blaupunkt: Serial number starts with ‘BP’ and is 14 digits total. (Example: BP123456789012). Enter as is.
  • Special Series (Bosch/Blaupunkt): Serial number starts with ‘815’ or ‘905’ and is 17 digits (Example: 815BP… or 905CM…).
    Attention: For these series, you must enter the entire number (17 digits) without deleting the initial 815/905 numbers.
Lancia Bosch Blaupunkt Radio Serial Number
Lancia Bosch Blaupunkt 815CM Serial Number

2. Lancia Daiichi and Continental Series

Daiichi: These are screen models in new generation Lancia Ypsilon vehicles. The serial number is usually a 5-digit number or letter+number combination (Example: A1234 or 12345). Check the “Serial No” section on the label.

Continental: These are multimedia-enabled devices, serial number starts with A2C or A3C. Enter the complete long code Example: A2C5340663800001856.

Lancia Daiichi Radio Serial No Example
Lancia Continental Radio Code Serial No

3. Lancia Philips Series (Starting with PH)

Found in older model Lancia (Example: Lybra) vehicles. Serial number starts with PH letters and consists of 14 digits total.

How to Enter? Enter the complete serial number (Example: PHAPEF56789012) into the inquiry tool.

Tip: Even if the label on Philips radios is worn, the serial number is usually engraved/stamped on the metal case of the radio (on the side surface). Please also check the metal surface.

Code Entry Procedure (Lancia Blaupunkt & Bosch)

Turn on the radio, see “CODE” or “—-“ text on the screen.

  1. 1st digit: Press the “1” button repeatedly to set the first number.
  2. 2nd digit: Press the “2” button to set the second number.
  3. 3rd digit: Press the “3” button to set the third number.
  4. 4th digit: Press the “4” button to set the fourth number.

Confirmation: When you have entered the password correctly, to confirm, press and hold the “5”, “6” or “>>” button (depending on the model) until you hear a beep.

How to Enter Lancia Philips Radio Code?
Turn on the radio, “CODE” and then “- – – -“ dashes will appear on the screen.

  • Enter your code directly using the number buttons (Preset) on the radio.
  • For example for 1234: Press buttons 1, 2, 3 and 4 in sequence.
  • After typing the correct password, press the “+>” (or right arrow) button to confirm.

Lancia Radio Code Password Finder Program;


FAQ About Lancia Radio Code

Question: I entered the code but it says “WAIT” or “SYSTEM BLOCKED”?
The radio has put itself into protection mode as a result of incorrect entries. You need to wait between 15 minutes to 1 hour by leaving the ignition and radio on (half ignition). At the end of the period, the code entry screen will appear again.
Question: My Lancia radio says “CANCHECK”, I cannot enter the code?
The “CANCHECK” warning indicates that the radio cannot communicate with the car’s brain (usually occurs with aftermarket radios). In this case, the code will not work, the radio needs to be introduced to the vehicle at the service or electronics shop.
Question: My Lancia radio code starts with 815 or 905, I’m getting an error?
In Bosch and Blaupunkt special series (especially Ypsilon and Delta), the serial number is 17 digits. Please enter the entire serial number as is, without deleting the “815…” or “905…” part. The system will automatically detect it.
0 0 vote
Article Rating
Abone Ol
Bildir
guest
0 Yorum
Inline Feedbacks
View all comments
0
Bu konuda sorunuz mu var ? O halde yorum yaz!x
()
x