Hyundai Radio Code Finder (i20, Accent, Tucson, Getz & All Models)

Hello Valued Hyundai Owners,

Has your radio locked up after a battery change in your Hyundai (Accent Blue, i20, i30, Tucson, Elantra, Getz, or Starex)? If you see “Code”, “Enter Code”, or “Security Code” on the screen, it means your radio’s anti-theft system has been activated. To continue enjoying your music, you need to enter the specific code produced for your radio.

In this guide, we will explain how to find unlock codes for **Mobis (EMP3)** and **Becker** series radios used in Hyundai vehicles.

Once you have your serial number, you can get your code in seconds using our Online Hyundai Radio Code Finder Service at the bottom of the page.

Important Step: Where is the Hyundai Radio Serial Number?

To calculate your Hyundai radio code, we need the serial number written on the label on the back of the device.

You Will Need to Remove the Radio

• In Hyundai models, the serial number usually cannot be seen by pressing screen buttons.
• You need to carefully remove the plastic trim around the radio, unscrew the 4 screws holding the device, and pull the radio towards you.
• Note down the serial number from the white label on the top or side of the radio, as shown in the examples below.

After obtaining your serial number, you can get your code using our online tool below.

1. Hyundai EMP3 (Mobis) Series (Letter + 8 Digits)

This is the most common radio type found in Hyundai i20, i30, Accent Blue, and ix35 models. The label shows the **Model Name** and the **Serial Number** below it.

Your serial number usually starts with the following letters and consists of 10 characters in total:

• MP (e.g.: MP12345678)
• MT (e.g.: MT00551122)
• MC (e.g.: MC28551144)
• Starts with TQ or BQ.

How to Enter? Enter the serial number contiguously including letters (e.g., MP12005566).

2. Hyundai MP3 Series (Only 4 Digits)

This format can be found in older Hyundai Accent, Getz, or Starex vehicles. It sometimes appears on the radio label as “Security Code” or as the last 4 digits of the barcode.

• The serial number consists of only a **4-digit** number. (e.g.: 1234 or 8541)

How to Enter? Enter only the 4 digits you found.

3. Hyundai Becker (Harman) Series (Starting with BE)

These are navigation or high-spec radios from Hyundai. The serial number always starts with **’BE’** and is 14 characters long.

• Example Format: BE791812345678

Hyundai Radio Code Finder Tool;

Frequently Asked Questions (FAQ) About Hyundai Radio Code